Ap3g2-k9w7-tar.153-3.jbb1.tar Work Patched

If your AP is bricked (boot loop, no IOS), you can still use ap3g2-k9w7-tar.153-3.jbb1.tar via ROMMON.

The file is typically loaded via a TFTP server during a ROMMON recovery or by using the archive download-sw CLI command. For recovery purposes, the file is often renamed to ap3g2-k9w7-tar.default on the TFTP server to be automatically pulled by the AP. AP 3702i - IOS version for Autonomous Mode Ap3g2-k9w7-tar.153-3.jbb1.tar WORK

This image is frequently used to convert "Lightweight" APs (which require a controller) into "Autonomous" APs. Site Surveys: If your AP is bricked (boot loop, no

If you are performing a recovery or conversion from the (ROMMON) prompt, these are the standard steps used to "inflate" and load the image from a TFTP server: Set Temp IP Info : AP 3702i - IOS version for Autonomous Mode

AP> enable Password: AP#