| Error | Meaning | Solution | | :--- | :--- | :--- | | | Driver or preloader mismatch | Reinstall VCOM drivers. Use a different USB port (USB 2.0 recommended). | | S_DL_GET_DRAM_SETTINGS_FAIL | Wrong scatter or preloader | Ensure you’re using the exact S160 firmware. Try "Format All + Download" (last resort). | | S_FT_ENABLE_DRAM_FAIL | Dead battery or hardware fault | Charge phone for 2 hours using a wall charger. | | Status 0xC0010001 | Authentication error | Use an authenticated Download Agent (DA) file from the firmware folder. | | Phone still hangs on logo after flash | Wrong variant (e.g., Unisoc vs MTK) | Double-check chipset and download the correct S160 file. |
: Use a tool like WinRAR or 7-Zip to extract the downloaded firmware and the flash tool (usually SPD Upgrade Tool ResearchDownload Load the File : Open the flash tool, click the "Load Packet" (gear icon), and select the file from the firmware folder. Connect the Device Turn off the phone completely. Volume Down (or Volume Up + Down) button. Connect the phone to the PC via a USB cable. Start Flashing : Once the tool detects the device, click the (Play) button. The process usually takes 3–5 minutes. : After the tool shows a green lava benco v90 ae9120 flash file s160 hang logo new
: Once the tool recognizes the device, click "Start." Wait for the "Passed" or "Success" message. | Error | Meaning | Solution | |
Lava Benco V90 AE9120 Flash File (Search for the S160 specific build). Try "Format All + Download" (last resort)