Bosch Kl 1208 Battery Charger Manual Extra Quality

Apply a load of approximately 110W (e.g., turning on the vehicle's full-beam headlights). Observe the yellow LED after roughly 30 seconds: : Charging is not necessary. Flashing Light : Charging is required. No Light : The battery has a very low charge. Safety and Care

Slide the Bosch 12V battery into the charging bay. It should click into place. The battery will only insert one way (keyed design). bosch kl 1208 battery charger manual

: Plug the unit into a mains socket and set the power switch to (I) . A red LED in the center should light up to indicate power. Monitor Charging : Yellow LED Flashing : The battery is currently charging. Apply a load of approximately 110W (e

Connect the terminal to the negative battery pole. No Light : The battery has a very low charge

Keep the battery terminals and charger clamps clean of corrosion using a wire brush or damp cloth.