Atir Strap And Beamd With Fix Crack ((hot)) Jun 2026

Before generating crack width results, ensure the following conditions are met within the STRAP Manual Load Combinations : Crack widths must be calculated for Serviceability Limit State (SLS)

While strapping is for localized cracks, the "Beam" technique is used for larger areas of instability or to create load-bearing supports without installing visible steel beams. Atir Strap And Beamd With Fix Crack

| Crack Width | Severity | Atir Strap Suitability | |-------------|----------|------------------------| | < 0.3 mm | Cosmetic | Not required | | 0.3 mm – 1.0 mm | Minor | Optional (monitor first) | | 1.0 mm – 3.0 mm | Moderate | Recommended | | > 3.0 mm | Severe | Mandatory + grouting | Before generating crack width results, ensure the following

This makes the technique superior to mere grouting for structural cracks. However, you must call a structural engineer if:

This method is excellent for localized cracks (less than 1/3 of the beam depth or length). However, you must call a structural engineer if:

The surface is ground down to remove contaminants, ensuring the adhesive can bond directly to the "meat" of the concrete. Injection:

: The beam reinforcement (longitudinal and shear) must already be calculated or manually assigned in the Beam Design module. ATIR Engineering 2. Configuration Steps To input and calculate crack width parameters: Select Combinations : Activate only the relevant SLS combinations in the results environment. Define Parameters : Navigate to Crack width > Detailed