: Insert the prepared card into the powered-off device and turn it on; a progress bar will typically appear to indicate flashing.
Click Burn . Wait for the progress bar to turn green and display a "Magic Complete" or "Burn End" message. Troubleshooting Common Issues phoenixcard v412 repack
| Problem | Likely Cause | Solution using repack | |--------|--------------|------------------------| | "No SD Card found" | Driver conflict or card reader locked | Run as admin; use a different USB port; disable antivirus temporarily | | "Burn failed at 98%" | Bad SD card sector or corrupted .img | Use "Format to Normal" again; try a different SD card; verify firmware MD5 | | USB device not detected (FEL mode) | Windows driver issue | Run zadig.exe from the repack’s driver folder, install libusb-win32 for the Allwinner device | | "Invalid image format" on a valid image | Original PhoenixCard signature check | Repack should bypass this. If still error, the image may be for PhoenixSuit (USB), not PhoenixCard (SD) | : Insert the prepared card into the powered-off