The relay closes and starts discharging (powering your load) when the battery voltage is at or above the Upper Limit (UP) Deactivation:
The "IN" symbol will flash while the battery is actively charging. Discharging Control (P-2 / OUT): Activation: xycd60 manual
The Xycd60 device comes with a range of innovative features and functions. Here are some of the key highlights: The relay closes and starts discharging (powering your
Prevents overcharging by cutting off the charger when the voltage reaches the "UP" limit. | Problem | Likely cause | Solution |
| Problem | Likely cause | Solution | |---------|--------------|----------| | No display | Input voltage <6V or reverse polarity | Check power supply wiring | | Relay chattering | Power supply unstable or near threshold | Stabilize input or widen hysteresis | | Wrong voltage reading | Calibration off | Re-calibrate with known meter | | Load stays off after fault | P6 delay not elapsed or P1/P3 values too tight | Wait or adjust thresholds |