Vcds Atmega162 | Reflash

| Region | Address Range | Content | |--------|----------------|---------| | Bootloader | 0x0000 - 0x03FF (1KB) | Ross-Tech proprietary bootloader | | Application | 0x0400 - 0x3FFF (~15KB) | Main firmware | | EEPROM | 0x0000 - 0x03FF (1KB) | Serial number, calibration, unique keys | | Lock Bits | FUSE bytes | Lock bootloader section, disable SPI/JTAG readout |

Often used for specific VCDS chip configurations. vcds atmega162 reflash

After writing, set lock bits to prevent accidental overwrite or reverse-engineering: | Region | Address Range | Content |

This article exists for and for users who: vcds atmega162 reflash

: Correct "fuses" (low, high, and extended) must be set during the flash to ensure the chip operates at the right clock speed and has proper write protection.